Home / Pressure / Convert from m head to aPa

Convert Meter of Head to Attopascal (m head to aPa)
Meter of Head (m head) and Attopascal (aPa) are both units of pressure. With the conversion form below, you can effortlessly and accurately convert meter of head to attopascal. This free online calculator tool makes it simple and easy to perform the conversion from m head unit to the aPa unit.

Meter of Head to Attopascal conversion

From:

m head

To:

aPa

Convert from Attopascal to Meter of Head

Meter of Head to Attopascal Conversion Formula

One Meter of Head is equal to 9.80665e+21 Attopascal.

Formula: 1 m head = 9.80665e+21 aPa

By using this conversion factor, you can easily convert any pressure measurement from meter of head unit to attopascal unit with precision.

How to Convert m head to aPa?

Converting from m head to aPa is a straightforward process. Follow these steps to ensure accurate conversions from meter of head to attopascal:

Select the Meter of Head Value: Start by determining the meter of head (m head) value you want to convert into attopascal (aPa). This is your starting point.
Multiply by the Conversion Factor: To calculate meter of head to equivalent attopascal amount, multiply the selected m head value by 9.80665e+21.
Illustration of Multiplication:
1 m head = 9.80665e+21 aPa
10 m head = 9.80665e+22 aPa
100 m head = 9.80665e+23 aPa
Find the Conversion Result: The result of this multiplication is your converted value in attopascal unit. This represents the same pressure but in a different unit.
Save Your Attopascal Value: After converting, remember to save the result. This value represents the pressure you initially measured, now expressed in attopascals.
Alternative Method – Division: If you prefer not to multiply, you can achieve the same conversion by dividing the meter of head value by 1.019716e-22. This alternative method also gives you the correct pressure in attopascals.
Illustration of Division:
aPa = m head ÷ 1.019716e-22

What is Pressure?

Pressure is the force applied perpendicular to a surface per unit area: P = F / A. The SI unit is the pascal (Pa), equal to one newton per square metre (1 Pa = 1 N/m²). Practical applications use larger units: the bar (1 bar = 100,000 Pa, close to standard atmospheric pressure), atmosphere (atm) (1 atm = 101,325 Pa), and psi (pounds per square inch, used in the US for tire and gas pressures). Blood pressure is measured in mmHg (millimetres of mercury), also called torr.

What is Meter of Head?

The meter of head (symbol: mH₂O or m head) is a non-SI unit of pressure that represents the pressure generated by a one-meter column of water under standard gravity. It is widely used in hydraulics, water supply systems, pumps, irrigation, and fluid engineering to describe pressure and pump performance. Although the pascal is the SI unit of pressure, the meter of head remains popular because it directly relates pressure to water height. It is based on the principles of hydraulic head.

One meter of head is equal to 9,806.65 pascals, 9.80665 kilopascals, 0.0980665 bar, 1.42233 pounds per square inch, and 3.28084 feet of water. The meter of head is commonly used to specify pump capacity and water system pressure.

What is Attopascal?

The attopascal (symbol: aPa) is an SI-derived unit of pressure equal to one quintillionth (10^-18) of a pascal. It is an extremely small pressure unit used mainly in theoretical physics, nanotechnology, and scientific research involving ultra-low pressure measurements. The attopascal uses the SI prefix atto, representing a factor of 10^-18.

One attopascal is equal to 0.000000000000000001 pascal, 0.001 femtopascal, 0.000000001 nanopascal, 1×10^-23 bar, and 9.86923×10^-24 standard atmosphere. Although rarely used outside research, the attopascal is part of the complete SI pressure scale.

Meter of Head to Attopascal Examples

Example 1:
Convert 0.7 Meter of Head pressure to Attopascal unit.
Solution:
We know that one Meter of Head is equivalent to 9.80665e+21 Attopascal.
Therefore,
0.7 m head = 0.7 x 9.80665e+21 aPa.
0.7 m head = 6.864655e+21 aPa.
Hence, 0.7 Meter of Head is approximately equal to 6.864655e+21 Attopascal.
Example 2:
Convert 5 Meter of Head pressure to Attopascal unit.
Solution:
We know that one Meter of Head is equivalent to 9.80665e+21 Attopascal.
Therefore,
5 m head = 5 x 9.80665e+21 aPa.
5 m head = 4.903325e+22 aPa.
Hence, 5 Meter of Head is approximately equal to 4.903325e+22 Attopascal.

Frequently Asked Questions

How do you convert m head to aPa formula?

The main formula for the conversion of the m head value to aPa amount is to multiply the m head value by 9.80665e+21.

There are 9.80665e+21 Attopascal in 1 Meter of Head.To convert from Meter of Head to Attopascal, multiply your figure by 9.80665e+21 (or divide by 1.019716e-22).

What is the relation between Meter of Head and Attopascal?

The relationship between Meter of Head and Attopascal is given as follows: 1 m head = 9.80665e+21 aPa

What is the value of 1 Meter of Head in equivalent Attopascal?

1 Meter of Head pressure is equivalent to 9.80665e+21 Attopascal pressure.

What is the meter-of-head in attopascal?

1 meter-of-head equals 9.80665e+21 attopascals.

What is the value of 15 Meter of Head in Attopascals?

We know that 1 Meter of Head is equal to 9.80665e+21 Attopascal, multiply 15 by 9.80665e+21 Attopascal. Therefore, 15 Meter of Head = 15 x 9.80665e+21 Attopascal, 15 m head = 1.470998e+23 aPa. Hence, the value of 15 Meter of Head in Attopascal is 1.470998e+23 aPa.

What Pressure is 1 aPa?

The Pressure of 1 aPa spans 1.019716e-22 Meter of Head.

1 m head how much attopascal?

1 Meter of Head (m head) corresponds to 9.80665e+21 Attopascal (aPa).

Meter of Head to Other Unit Conversions

View all conversions of Meter of Head