Home / Pressure / Convert from m head to MPa

Convert Meter of Head to Megapascal (m head to MPa)

Meter of Head (m head) and Megapascal (MPa) are both units of pressure. With the conversion form below, you can effortlessly and accurately convert meter of head to megapascal. This free online calculator tool makes it simple and easy to perform the conversion from m head unit to the MPa unit.

Meter of Head to Megapascal conversion

m head
MPa
Convert from Megapascal to Meter of Head

Meter of Head to Megapascal Conversion Formula

One Meter of Head is equal to 0.00980665 Megapascal.

Formula: 1 m head = 0.00980665 MPa

By using this conversion factor, you can easily convert any pressure measurement from meter of head unit to megapascal unit with precision.

How to Convert m head to MPa?

Converting from m head to MPa is a straightforward process. Follow these steps to ensure accurate conversions from meter of head to megapascal:

  • Select the Meter of Head Value: Start by determining the meter of head (m head) value you want to convert into megapascal (MPa). This is your starting point.
  • Multiply by the Conversion Factor: To calculate meter of head to equivalent megapascal amount, multiply the selected m head value by 0.00980665.
  • Illustration of Multiplication:
  • 1 m head = 0.00980665 MPa
  • 10 m head = 0.0980665 MPa
  • 100 m head = 0.980665 MPa
  • Find the Conversion Result: The result of this multiplication is your converted value in megapascal unit. This represents the same pressure but in a different unit.
  • Save Your Megapascal Value: After converting, remember to save the result. This value represents the pressure you initially measured, now expressed in megapascals.
  • Alternative Method – Division: If you prefer not to multiply, you can achieve the same conversion by dividing the meter of head value by 101.971621298. This alternative method also gives you the correct pressure in megapascals.
  • Illustration of Division:
  • MPa = m head ÷ 101.971621298

What is Pressure?

Pressure is the force applied perpendicular to a surface per unit area: P = F / A. The SI unit is the pascal (Pa), equal to one newton per square metre (1 Pa = 1 N/m²). Practical applications use larger units: the bar (1 bar = 100,000 Pa, close to standard atmospheric pressure), atmosphere (atm) (1 atm = 101,325 Pa), and psi (pounds per square inch, used in the US for tire and gas pressures). Blood pressure is measured in mmHg (millimetres of mercury), also called torr.

What is Meter of Head?

The meter of head (symbol: mH₂O or m head) is a non-SI unit of pressure that represents the pressure generated by a one-meter column of water under standard gravity. It is widely used in hydraulics, water supply systems, pumps, irrigation, and fluid engineering to describe pressure and pump performance. Although the pascal is the SI unit of pressure, the meter of head remains popular because it directly relates pressure to water height. It is based on the principles of hydraulic head.

One meter of head is equal to 9,806.65 pascals, 9.80665 kilopascals, 0.0980665 bar, 1.42233 pounds per square inch, and 3.28084 feet of water. The meter of head is commonly used to specify pump capacity and water system pressure.

What is Megapascal?

The megapascal (symbol: MPa) is an SI-derived unit of pressure equal to one million (106) pascals. It is one of the most widely used pressure units in civil engineering, mechanical engineering, hydraulics, and material science. The megapascal is commonly used to express concrete compressive strength, steel yield strength, hydraulic pressure, and industrial operating pressures. It uses the SI prefix mega, representing a factor of one million.

One megapascal is equal to 1,000,000 pascals, 1,000 kilopascals, 0.001 gigapascal, 10 bars, and 145.038 pounds per square inch. The megapascal is the preferred SI unit for reporting engineering pressures and material properties.

Some Meter of Head to Megapascal conversions

Meter of Head to Megapascal Examples

  • Example 1:

    Convert 0.4 Meter of Head pressure to Megapascal unit.

    Solution:

    We know that one Meter of Head is equivalent to 0.00980665 Megapascal.

    Therefore,

    0.4 m head = 0.4 x 0.00980665 MPa.

    0.4 m head = 0.00392266 MPa.

    Hence, 0.4 Meter of Head is approximately equal to 0.00392266 Megapascal.

  • Example 2:

    Convert 10 Meter of Head pressure to Megapascal unit.

    Solution:

    We know that one Meter of Head is equivalent to 0.00980665 Megapascal.

    Therefore,

    10 m head = 10 x 0.00980665 MPa.

    10 m head = 0.0980665 MPa.

    Hence, 10 Meter of Head is approximately equal to 0.0980665 Megapascal.

Frequently Asked Questions

How do you convert m head to MPa formula?

The main formula for the conversion of the m head value to MPa amount is to multiply the m head value by 0.00980665.

There are 0.00980665 Megapascal in 1 Meter of Head.To convert from Meter of Head to Megapascal, multiply your figure by 0.00980665 (or divide by 101.971621298).

What is the relation between Meter of Head and Megapascal?

The relationship between Meter of Head and Megapascal is given as follows: 1 m head = 0.00980665 MPa

What is the value of 1 Meter of Head in equivalent Megapascal?

1 Meter of Head pressure is equivalent to 0.00980665 Megapascal pressure.

What is the meter-of-head in megapascal?

1 meter-of-head equals 0.00980665 megapascals.

What is the value of 15 Meter of Head in Megapascals?

We know that 1 Meter of Head is equal to 0.00980665 Megapascal, multiply 15 by 0.00980665 Megapascal. Therefore, 15 Meter of Head = 15 x 0.00980665 Megapascal, 15 m head = 0.14709975 MPa. Hence, the value of 15 Meter of Head in Megapascal is 0.14709975 MPa.

What Pressure is 1 MPa?

The Pressure of 1 MPa spans 101.971621298 Meter of Head.

1 m head how much megapascal?

1 Meter of Head (m head) corresponds to 0.00980665 Megapascal (MPa).

All Measurements to Convert

Meter of Head to Other Unit Conversions

View all conversions of Meter of Head