Home / Pressure / Convert from m head to Nanopascal

Convert Meter of Head to Nanopascal (m head to Nanopascal)

Meter of Head (m head) and Nanopascal (Nanopascal) are both units of pressure. With the conversion form below, you can effortlessly and accurately convert meter of head to nanopascal. This free online calculator tool makes it simple and easy to perform the conversion from m head unit to the Nanopascal unit.

Meter of Head to Nanopascal conversion

m head
Nanopascal
Convert from Nanopascal to Meter of Head

Meter of Head to Nanopascal Conversion Formula

One Meter of Head is equal to 9.80665e+12 Nanopascal.

Formula: 1 m head = 9.80665e+12 Nanopascal

By using this conversion factor, you can easily convert any pressure measurement from meter of head unit to nanopascal unit with precision.

How to Convert m head to Nanopascal?

Converting from m head to Nanopascal is a straightforward process. Follow these steps to ensure accurate conversions from meter of head to nanopascal:

  • Select the Meter of Head Value: Start by determining the meter of head (m head) value you want to convert into nanopascal (Nanopascal). This is your starting point.
  • Multiply by the Conversion Factor: To calculate meter of head to equivalent nanopascal amount, multiply the selected m head value by 9.80665e+12.
  • Illustration of Multiplication:
  • 1 m head = 9.80665e+12 Nanopascal
  • 10 m head = 9.80665e+13 Nanopascal
  • 100 m head = 9.80665e+14 Nanopascal
  • Find the Conversion Result: The result of this multiplication is your converted value in nanopascal unit. This represents the same pressure but in a different unit.
  • Save Your Nanopascal Value: After converting, remember to save the result. This value represents the pressure you initially measured, now expressed in nanopascals.
  • Alternative Method – Division: If you prefer not to multiply, you can achieve the same conversion by dividing the meter of head value by 1.019716e-13. This alternative method also gives you the correct pressure in nanopascals.
  • Illustration of Division:
  • Nanopascal = m head ÷ 1.019716e-13

What is Pressure?

Pressure is the force applied perpendicular to a surface per unit area: P = F / A. The SI unit is the pascal (Pa), equal to one newton per square metre (1 Pa = 1 N/m²). Practical applications use larger units: the bar (1 bar = 100,000 Pa, close to standard atmospheric pressure), atmosphere (atm) (1 atm = 101,325 Pa), and psi (pounds per square inch, used in the US for tire and gas pressures). Blood pressure is measured in mmHg (millimetres of mercury), also called torr.

What is Meter of Head?

The meter of head (symbol: mH₂O or m head) is a non-SI unit of pressure that represents the pressure generated by a one-meter column of water under standard gravity. It is widely used in hydraulics, water supply systems, pumps, irrigation, and fluid engineering to describe pressure and pump performance. Although the pascal is the SI unit of pressure, the meter of head remains popular because it directly relates pressure to water height. It is based on the principles of hydraulic head.

One meter of head is equal to 9,806.65 pascals, 9.80665 kilopascals, 0.0980665 bar, 1.42233 pounds per square inch, and 3.28084 feet of water. The meter of head is commonly used to specify pump capacity and water system pressure.

What is Nanopascal?

The nanopascal (symbol: nPa) is an SI-derived unit of pressure equal to one billionth (10-9) of a pascal. It is used in scientific research, vacuum technology, acoustics, and nanotechnology where extremely small pressure values must be measured with high precision. The nanopascal uses the SI prefix nano, representing one billionth.

One nanopascal is equal to 0.000000001 pascal, 0.001 micropascal, 1,000 picopascals, 1×10-14 bar, and 9.86923×10-15 standard atmosphere. The nanopascal is an important SI unit for expressing ultra-low pressure values.

Some Meter of Head to Nanopascal conversions

Meter of Head to Nanopascal Examples

  • Example 1:

    Convert 0.3 Meter of Head pressure to Nanopascal unit.

    Solution:

    We know that one Meter of Head is equivalent to 9.80665e+12 Nanopascal.

    Therefore,

    0.3 m head = 0.3 x 9.80665e+12 Nanopascal.

    0.3 m head = 2.941995e+12 Nanopascal.

    Hence, 0.3 Meter of Head is approximately equal to 2.941995e+12 Nanopascal.

  • Example 2:

    Convert 8 Meter of Head pressure to Nanopascal unit.

    Solution:

    We know that one Meter of Head is equivalent to 9.80665e+12 Nanopascal.

    Therefore,

    8 m head = 8 x 9.80665e+12 Nanopascal.

    8 m head = 7.84532e+13 Nanopascal.

    Hence, 8 Meter of Head is approximately equal to 7.84532e+13 Nanopascal.

Frequently Asked Questions

How do you convert m head to Nanopascal formula?

The main formula for the conversion of the m head value to Nanopascal amount is to multiply the m head value by 9.80665e+12.

There are 9.80665e+12 Nanopascal in 1 Meter of Head.To convert from Meter of Head to Nanopascal, multiply your figure by 9.80665e+12 (or divide by 1.019716e-13).

What is the relation between Meter of Head and Nanopascal?

The relationship between Meter of Head and Nanopascal is given as follows: 1 m head = 9.80665e+12 Nanopascal

What is the value of 1 Meter of Head in equivalent Nanopascal?

1 Meter of Head pressure is equivalent to 9.80665e+12 Nanopascal pressure.

What is the meter-of-head in nanopascal?

1 meter-of-head equals 9.80665e+12 nanopascals.

What is the value of 15 Meter of Head in Nanopascals?

We know that 1 Meter of Head is equal to 9.80665e+12 Nanopascal, multiply 15 by 9.80665e+12 Nanopascal. Therefore, 15 Meter of Head = 15 x 9.80665e+12 Nanopascal, 15 m head = 1.470998e+14 Nanopascal. Hence, the value of 15 Meter of Head in Nanopascal is 1.470998e+14 Nanopascal.

What Pressure is 1 Nanopascal?

The Pressure of 1 Nanopascal spans 1.019716e-13 Meter of Head.

1 m head how much nanopascal?

1 Meter of Head (m head) corresponds to 9.80665e+12 Nanopascal (Nanopascal).

All Measurements to Convert

Meter of Head to Other Unit Conversions

View all conversions of Meter of Head