Home / Pressure / Convert from m head to Petapascal

Convert Meter of Head to Petapascal (m head to Petapascal)
Meter of Head (m head) and Petapascal (Petapascal) are both units of pressure. With the conversion form below, you can effortlessly and accurately convert meter of head to petapascal. This free online calculator tool makes it simple and easy to perform the conversion from m head unit to the Petapascal unit.

Meter of Head to Petapascal conversion

From:

m head

To:

Petapascal

Convert from Petapascal to Meter of Head

Meter of Head to Petapascal Conversion Formula

One Meter of Head is equal to 9.80665e-12 Petapascal.

Formula: 1 m head = 9.80665e-12 Petapascal

By using this conversion factor, you can easily convert any pressure measurement from meter of head unit to petapascal unit with precision.

How to Convert m head to Petapascal?

Converting from m head to Petapascal is a straightforward process. Follow these steps to ensure accurate conversions from meter of head to petapascal:

Select the Meter of Head Value: Start by determining the meter of head (m head) value you want to convert into petapascal (Petapascal). This is your starting point.
Multiply by the Conversion Factor: To calculate meter of head to equivalent petapascal amount, multiply the selected m head value by 9.80665e-12.
Illustration of Multiplication:
1 m head = 9.80665e-12 Petapascal
10 m head = 9.80665e-11 Petapascal
100 m head = 9.80665e-10 Petapascal
Find the Conversion Result: The result of this multiplication is your converted value in petapascal unit. This represents the same pressure but in a different unit.
Save Your Petapascal Value: After converting, remember to save the result. This value represents the pressure you initially measured, now expressed in petapascals.
Alternative Method – Division: If you prefer not to multiply, you can achieve the same conversion by dividing the meter of head value by 1.019716e+11. This alternative method also gives you the correct pressure in petapascals.
Illustration of Division:
Petapascal = m head ÷ 1.019716e+11

What is Pressure?

Pressure is the force applied perpendicular to a surface per unit area: P = F / A. The SI unit is the pascal (Pa), equal to one newton per square metre (1 Pa = 1 N/m²). Practical applications use larger units: the bar (1 bar = 100,000 Pa, close to standard atmospheric pressure), atmosphere (atm) (1 atm = 101,325 Pa), and psi (pounds per square inch, used in the US for tire and gas pressures). Blood pressure is measured in mmHg (millimetres of mercury), also called torr.

What is Meter of Head?

The meter of head (symbol: mH₂O or m head) is a non-SI unit of pressure that represents the pressure generated by a one-meter column of water under standard gravity. It is widely used in hydraulics, water supply systems, pumps, irrigation, and fluid engineering to describe pressure and pump performance. Although the pascal is the SI unit of pressure, the meter of head remains popular because it directly relates pressure to water height. It is based on the principles of hydraulic head.

One meter of head is equal to 9,806.65 pascals, 9.80665 kilopascals, 0.0980665 bar, 1.42233 pounds per square inch, and 3.28084 feet of water. The meter of head is commonly used to specify pump capacity and water system pressure.

What is Petapascal?

The petapascal (symbol: PPa) is an SI-derived unit of pressure equal to one quadrillion (10¹⁵) pascals. It is an extremely large pressure unit used primarily in astrophysics, geophysics, high-energy physics, and theoretical research involving exceptionally high pressures. The petapascal uses the SI prefix peta, representing a factor of 10¹⁵.

One petapascal is equal to 1,000 terapascals, 1,000,000 gigapascals, 1,000,000,000 megapascals, 10,000,000,000 bars, and 1×10¹⁵ pascals. Although rarely encountered outside advanced scientific research, the petapascal is part of the complete SI pressure scale.

Some Meter of Head to Petapascal conversions

Meter of Head to Petapascal Examples

Example 1:
Convert 0.8 Meter of Head pressure to Petapascal unit.
Solution:
We know that one Meter of Head is equivalent to 9.80665e-12 Petapascal.
Therefore,
0.8 m head = 0.8 x 9.80665e-12 Petapascal.
0.8 m head = 7.84532e-12 Petapascal.
Hence, 0.8 Meter of Head is approximately equal to 7.84532e-12 Petapascal.
Example 2:
Convert 9 Meter of Head pressure to Petapascal unit.
Solution:
We know that one Meter of Head is equivalent to 9.80665e-12 Petapascal.
Therefore,
9 m head = 9 x 9.80665e-12 Petapascal.
9 m head = 8.825985e-11 Petapascal.
Hence, 9 Meter of Head is approximately equal to 8.825985e-11 Petapascal.

Frequently Asked Questions

How do you convert m head to Petapascal formula?

The main formula for the conversion of the m head value to Petapascal amount is to multiply the m head value by 9.80665e-12.

There are 9.80665e-12 Petapascal in 1 Meter of Head.To convert from Meter of Head to Petapascal, multiply your figure by 9.80665e-12 (or divide by 1.019716e+11).

What is the relation between Meter of Head and Petapascal?

The relationship between Meter of Head and Petapascal is given as follows: 1 m head = 9.80665e-12 Petapascal

What is the value of 1 Meter of Head in equivalent Petapascal?

1 Meter of Head pressure is equivalent to 9.80665e-12 Petapascal pressure.

What is the meter-of-head in petapascal?

1 meter-of-head equals 9.80665e-12 petapascals.

What is the value of 15 Meter of Head in Petapascals?

We know that 1 Meter of Head is equal to 9.80665e-12 Petapascal, multiply 15 by 9.80665e-12 Petapascal. Therefore, 15 Meter of Head = 15 x 9.80665e-12 Petapascal, 15 m head = 1.470998e-10 Petapascal. Hence, the value of 15 Meter of Head in Petapascal is 1.470998e-10 Petapascal.

What Pressure is 1 Petapascal?

The Pressure of 1 Petapascal spans 1.019716e+11 Meter of Head.

1 m head how much petapascal?

1 Meter of Head (m head) corresponds to 9.80665e-12 Petapascal (Petapascal).

Meter of Head to Other Unit Conversions

View all conversions of Meter of Head